PVC灑水軟水管:

這種扁平式PVC灑水軟水管需要在吃水線中安裝減壓器才能發揮最佳作用。

PVC灑水軟水管將細細的水霧噴射到空氣中。

PVC灑水軟水管看起來像扁平軟管，整個長度上都有穿孔，要獲得滴灌效果，只需將PVC灑水軟水管翻轉過來，水柱就會直接進入地下，PVC灑水軟水管具有配件和端蓋，可輕鬆連接到任何軟管上。 

灑水軟水管就是地上的“灑水器”系統，優點是成本低、易於安裝以及在種植和種植過程中易於移動系統，並且不需要組裝，放著就可以，你可以隨時更換PVC灑水軟水管的位置。 

Drip tape This flat-style tubing requires a pressure reducer in the waterline to function optimally. It works well for subsurface installations, but isn’t usually manufactured to last more than a few seasons.

Sprinkler Hoses Sprinkler hoses spray a fine mist of water into the air. 

They look like flat hoses with perforations all along their length. 

For a drip-irrigation effect, simply turn sprinkler hoses over, so the mist is directed straight into the ground. 

Sprinkler hoses have fittings and end caps for simple attachment to any hose or bib. Sprinkler hoses are easy to install: just lay the hose on the ground and screw to the hose line. 

However, because they are flat it’s more difficult to weave around tight curves. 

The spray can also cause erosion if the water pressure is too great. You can also make your own sprinkler hose from old garden hose by piercing holes in a pattern to direct the flow where you want it. 

Use a hot needle to pierce the hose, and be sure to crimp the end of the hose line. Use “Y” connectors to add more lines. 

These are available in plastic or brass. 

Lay the hose on the ground and work it between plantings and along rows as desired. Be sure the hose ends are closed. 

The advantages of an above-ground “soaker” system are low cost, ease of installation, and ease of moving the system during cultivation and planting. And no assembly is required.